Antminer L3+, 504MH/s

Reference:

£1,985.00

Weight 6.5 Kg. 

logo_btc_accepted.jpg

Quantity
In Stock

  • Security policy (Protected Site with Encrypted Systems) Security policy (Protected Site with Encrypted Systems)
  • Free Worldwide Shipping (you will have full control of your shipment via DHL systems) Free Worldwide Shipping (you will have full control of your shipment via DHL systems)
  • BITCOIN Secure Payment BITCOIN Secure Payment

✔ Hash Rate:  504 MH/s ±5%

✔ Power Consumption: 800W + 10% (at the wall, with APW3 ,93% efficiency, 25C ambient temp)

✔ Power Efficiency: 1.6 J/MH + 10%(at the wall, with APW3 93% efficiency, 25°C ambient temp)

✔ Rated Voltage: 11.60 ~13.00V

✔ Chip type: BM1485 (288 chips on four hashing boards, 72 chips on one hashing board)

✔ Dimensions: 352mm(L)*130mm(W)*187.5mm(H)

✔ Operating Temperature: 0 °C to 40 °C

✔ Network Connection: Ethernet

Notes:

Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.

PSU: A power supply unit is not included. You will need an ATX PSU with at least 9 six-pin PCIE connectors. There are 2 PCI-e connectors for +12V DC input on each hashing board and all 2 are required. Do not connect more than one PSU to the same hashing board!

We recommend the APW3++1600w power supply for use with the Antminer L3+. One power supply supports two Antminer L3+.

Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 9 PCIE connectors are connected to power supply.

9 Items

9 other products in the same category: